Contact Us

Email:sales@hdgenius.com
Address: 4633 Old Ironside Drive #270, Santa Clara, CA 95054
Tel:(408)837-7101
Fax:(408)332-5449

Products > Wireless HDMI Extender >Wireless HDMI Transmitter/Receiver HDbitT Extender 50M HD388

Wireless HDMI Transmitter/Receiver HDbitT Extender 50M HD388

QTY Price
1-5 489
5-30 487
>30 486

QTY:    

[Add My Connect]

Description

HD388 long range wireless HDbitT HDMI AV transmitter extends high definition audio and video to any HDTV display up to 164feet (50 meters). This wireless hdmi extender supports HD resolutions up to 1080p. Wirelessly transmit the HDMI signal to HDTV or projector.

This transmitter extends HDMI signal wirelessly from source device to display device up to 50meters with the advanced application of HDBitT transport protocol and wireless technology. It requires no cables between sender (TX) and receiver (RX) which makes the installation easy and clean.

Note:
1) Transmission distance will be different due to the environment.
2) Wall, brick or glass will shorten the signal cover range or cause big signal loss.


Features
  • Long range Wireless stream HDMI signal;
  • Full HD 1080p transmit up to 50m/164ft;
  • Full compliant with HDMI and HDCP;
  • IR remote extender for controlling source device;
  • Simple plug 'n play no software or WiFi required;


Important safety notice:
Please read below safety instructions carefully before installation and operation:

 ●  Please pay attention to all the warnings and hints on this device.
 ●  Do not expose this unit to rain, moisture and liquid.
 ●  Do not put any stuff into the device.
 ●  Do not repaire the device or open the enclosure without professional person guidence to avoid  electronic shock.
 ●  Make sure good ventilation openings to avoid product overheating damage.
 ●  Shut off power and make sure environment is safe before installation.
 ●  Do not plug-in/out the network cables and IR cables when it is in using to avoid cables damage.
 ●  Use DC5V only. Make sure the specification matched if using 3rd party DC adapters.


Package contents:

  HDMI extender TX sender*1pcs

  HDMI extender RX receiver*1pcs

  DC5V2A power adapter*2pcs

  IR blaster extension cable*1pcs

  IR receiver extension cable*1pcs

  User manual*1pcs


Installation Requirement:
1. HDMI source device (DVD, PS3, Set top box, PC etc);
2. HDMI display device like SDTV, HDTV, and projector with HDMI port.


Panel description:
1.HDMI Extender TX sender


  1 Power led

  It lights when power is on

  2 Data transmission led

  Led blinks slowly when it is building connection.

  Led blinks fast when it is successfully connected and transmitting data.

  3 Connection led

  It lights when wireless signal is well connected.

  4 Power input

  Connect with DC5V2A power adapter

  5 Reset

  Press reset button to restart the device

  6 HDMI input

  Connect with HDMI source device

  7 IR blaster extension cable interface

  Connect with IR blaster extension cable. Please put the IR blaster close to source device to best transmit the IR signal from receiver.

  8Antenna

  Launch wireless signal


2.HDMI extender RX receiver




  1 Power led

  It lights when power is on

  2 Data transmission led

  Led blinks slowly when it is building connection.

  Led blinks fast when it is successfully connected and transmitting data.

  3 Connection led

  It lights when wireless signal is well connected.

  4 Power input

  Connect with DC5V2A power adapter

  5 Reset

  Press reset button to restart the device

  6 HDMI output

  Connect with HDMI display device

  7 IR receiver extension cable interface

  Connect with IR receiver extension cable. Please make sure the remote control is within the required range of IR receiver.

  8Antenna

  Launch wireless signal


Connection:



1). Connect HDMI input with HDMI source device and connect IR blaster extension cable with IR OUT interface of the sender (TX).
2). Connect HDMI output with HDMI display device and connect IR receiver extension cable with IR IN interface..
3). Power on the device (power led lights) and it works.

Note:
When the wireless signal transmits through wall, glass or other obstacles, it will cause signal loss. Suggest installing this device in good environment with few obstacles.
The external environment wireless signal interfere the transmission, such as micro waver, wireless mouse and keyboard etc.


FAQ:
Q: TV display “waiting for connection” on the bottom right corner?
A: Please check if the power supply of TX (sender) and RX(receiver) is well connected and the power indicator led lights on.

Q: TV display “Please check the TX input signal”?
A:1) please check if there is an HDMI signal input of sender TX
    2) Try to connect the signal source directly to display device to see if there is signal output from source device or change the signal source, HDMI cables and try again.

Q: Display not fluent and stable
A: 1) Please move the position of sender (TX) and receiver (RX) and make sure the device is within the required signal range.
    2) Click “reset” button on the RX/RX panel, reset and reconnect.
    3) Remove other wireless signal disturbance and reduce the obstacles on the way.


Specification:

Items

Specification

HDMI signal

Full compatible with HDCP

Transport protocol

HDbitT

Support resolution

480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz, 1080p@50/60Hz

IR remote control

Support 20~60kHz IR remote device

Transmit distance

50m at 1080P 60Hz

Working temperature

0℃~60

Power supply

DC5V/2A

Power consumption

TX<8.5W  RX<5.5 W

Enclosure material

Metal

Product dimension

195.4(W)x137.5(D) x 30.8 (H) mm *2pcs

Weight

TX531g   RX:528g

Color

Black