Contact Us

Email:sales@hdgenius.com
Address: 4633 Old Ironside Drive #270, Santa Clara, CA 95054
Tel:(408)837-7101
Fax:(408)332-5449

Products > Other HDMI Converters >HDMI To HDMI + Audio Decoder Audio EDID Setting+SPDIF+5.1CH+HP Converter Ymhd010

HDMI To HDMI + Audio Decoder Audio EDID Setting+SPDIF+5.1CH+HP Converter Ymhd010

QTY Price
1-5 78.63
5-30 65.52
>30 60.48

QTY:    

[Add My Connect]

Description
  • 1X HDMI input and 1X HDMI output,can sync separation HDMI audio signal. Supports 1x SPDIF optical digital audio output, 6 channel RCA analog audio output, and 1x headphone jack output.
  • Support HDMI input up to 1080P/60Hz, supports 3D (24/30fs)
  • Support CEC and HDCP
  • Supports 3 modes of EDID management for audio formats, can switch among built-in EDID (2CH/5.1CH) and external EDID (TV).
  • Uses 24 bit/96KHz audio DSP and 24bit /192KHz DAC
  • Support digital audio formats: Dolby digital (AC3), DTS, LPCM, automatic identification signal format
  • Headphone amplifier output, can drive the general 3.5mm earphone
  • High tone quality, low noise
  • DC5V/1A power adapter


Opticalout: SPDIF Optical/Toslink output
HDMI in: HDMI input
Switch: Audio EDID mode switch. This switch allows users to select the source's audio EDID.
Pass: HDMI pass mode. Switch to PASS mode for the HDMI source to output audio per the EDID of connected TV or AV receiver supports up to LPCM 7.1 channels.
2CH: 2CH LPCM mode. Switch to 2CH mode for the HDMI source to output LPCM 2 channels audio per the built-in EDID.Then HDMI, SPDIF, RCA and headphones output.
5.1CH: 5.1CH bitstream Mode. Switch to B5.1CH mode for the HDMI source to output bitstream audio per the built-in EDID. Then HDMI, SPDIF and RCA output 5.1CH audio, the headphone output audio comes from FL and FR channel.
HDMI Led: HDMI OUTPUT indicator
O/I: Power on/standby key
PWR LED: POWER ON/OFF indicator

: 3.5 Stereo headphone output

SL/SR: Surround L/R analog output

SW: Sub woof analog output
FL/FR: Front L/R analog output
CEN: Center analog output
HDMI: HDMI output
DC5V: 5V DC in jack

Operation and connection:
1. Connect one HDMI cable from a DVD/Blu-ray player into the HDMI input port of decoder.
2. Connect one HDMI cable from TV/Monitor into the HDMI output port of decoder.
3. If you need a digital audio, connect one optical fiber from digital power amplifier into the SPDIF output port of decoder.
4. If you need an analog audio, Connect six AV cables from analog power amplifier into the analog audio output ports of decoder, the channel must correspond. If you want to connect to the TV or stereo power amplifier, you only need to connect the FL/FR two channel, and switch EDID mode in 2CH.
5. If you need to use the headphone output, pls switch EDID mode in 2CH.
6. Connect 5V power supply to the decoder and inserted into the power socket.


Features
HDMI resolution …………………………........................................ up to 1080P/50/60fs(3D 24/30fs)
Support video color format …………………………..…..…………………….24bit/deep color 30bit,36bit
HDMI Audio Format………………..DTS-HD/Dolby-TrueHD/LPCM 2/5.1/7.1CH/DTS/Dolby-AC3/DSD
Digital audio decode format…………………………………………Dolby Digital (AC3)/DTS/LPCM 2CH
HDMI Max bandwidth………………………………………………………….……………………...225MHz
HDMI Max baud rate…………………….………………….………………….……………………6.75Gbps
Input/Output TMDS signal ………….……………………………….……………….0.5~1.5Volts p-p(TTL)
Input/Output DDC signal ……………………………………………..……………………. 5Volts p-p (TTL)
DSP sample frequency range………………………………………………………………….. 32-96 KHz
DSP Bit rate range………………………………………………………………………………….16-24 Bit
Analog output level(1kHz@0dB)...............................................................................................1V RMS
SNR @ 0dB(CCIR/ARM)………………………………………………………………………………≥85dB
Distortion………………………………………………………………………………………………...≤0.1%
Frequency response…………………………………………………………………………….20Hz~20KHz
Headphone output power (1kHz@0dB RL=32)……………………………………………………...20mW
HDMI input cable distance…………………………………………≤15m AWG26 HDMI standard cable
HDMI output cable distance………………………………………..≤18m AWG26 HDMI standard cable
Max working current …………………………………………………………….……….…….….…..500mA
Power adapter format Input ……......….….…….…….…….…. AC 100V-240V 50HZ/60Hz, DC5V/1A
Operating Temperature range ……..…………….……………………………………………. -10 to +55degree
Storage Temperature range……………………………………………………………………. -20 to +60degree
Operating Humidity range ………………………….….……….……….10 to 90%RH (No Condensation)
Storage Humidity range………………………….….……….……………5 to 95%RH (No Condensation)
Case Dimension (L x W x H) ………………………………….…………………………. 139x64x22 (mm)
Weight …….…………………………….………………………………………….……………………. 220g


Notes:
Pls use the machine as the instruction listed to keep the long use lifetime of the machine.
1. The machine should be placed at the spot far from the Damp, High-Temperature, Dusty, Erosive, and oxidative environment.
2. All parts will be free from the strong shake, hit, fall.
3. Touching the power adaptor with the wet hands is prohibited.
4. Pls hold the power adaptor head and do not pull the power cord when cut off from the socket.
5. Pls turn the power off when the machines not used for long time.
6. Pls do not open the cover and do not touch the inside parts.
7. Pls use the original factory power adaptor.